Click to enlarge
Fiber Optic Inline Splice Closure (Model RI-210)
Fiber Optic Inline Splice Closure (Model RI-210)
Back to products
Optical Fibre Distribution Frame (FDF) (Model No. : RI-110)
Optical Fibre Distribution Frame (FDF) (Model No. : RI-110)

Optical Fiber Termination Box FTB (Model No. RIFTB-111)

The Optic Fiber Termination Box Model RIFTB-111 manufactured by Riddhi Infratel is compact, robust and composite in construction. This has been manufactured as per the latest state of art Telcordia technology and is in accordance with the ISO 9001:2008 series of standard and as per TEC Specification No. G/FTB-01/02. MAR99 for which Riddhi Infratel has been duly accredited. The Optical Fiber Termination Box is Wall/ pole mounted. The Optical Fiber Termination Box is having two input & two out put single cable entry ports. The FRP & Cable clamps will have a design which is flexible both for loose tube, Unitube, slotted core & Ribbon Fiber type of cables. The splice tray available inside the equipment shall be keeping minimum permissible bending radius for fiber inside the splice tray. Termination Box can be closed by a front cover with knob screws. A Brass thimble is provided to earth the Armored Cable. The material selection has been given special attention keeping in mind
for any climatic Conditions.

Category:
Description

Specifications

S.No Parameter Value/Dimensions
1 Length 500mm
2 Diameter 300mm
3 Depth 100mm
4 Color Epoxy baked Texture Grey or optional
5 Number of Cable Entry Ports with Size 4 Nos. with 19mm ID
6 No. of Splice trays 6/12/24/48/96/144 1/1/1/2/4/6
7 Size of Splice tray L-300 , W-110, D-12
8 Capacity of each Splice tray 24 Nos. for Mass Fusion
9 Consumable Kit Available inside the box
10 Fiber Splitter Can be accommodate
11 Aerial Wall /Pole Mounting Brackets Available if ask on extra cost
12 Packing Size of each corrugated box  L-505, W-305, H-105
13 Weight of Each FTB/WSC  6 Kgms
14 Size of Five Pcs. in Single Cartoon box L-512, W-312, H-512
15 Installation Manual Available inside the box
16 Size of six Pcs. in single Cartoon box L- 600mm, W-600mm, H-480
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Optical Fiber Termination Box FTB (Model No. RIFTB-111)”

Your email address will not be published. Required fields are marked *

Related products

IC LC SM DX Adapter

Pin Type IC
Number of Pins 2
Connector Type Male
Box Customized
Country of Origin Made in India
We are dealing in All Type of Optic LC SM DX Adapter we also have best Quality capatch cords of all type. Additional Information

Adjustable Cable Storage Bracket

Installation Instruction 1. The Adjustable Cable Storage Bracket Assembly is mounted on the pole at height of m with the use of SS Strip & Buckle. 1.4 Down Lead Clamp Assembly (Wedge Type) Product Overview Down Lead Clamp shall be used to properly fix the Aerial ADSS cable on the pole or cross arms to avoid the Movement of the cable under wind condition. The Down Lead Clamp Shall have the provision to fix it on the pole or cross arms by Stainless Steel

Opticle Fiber Stripper

Depending on fiber’s application, different optical fiber coating designs exist. However, 250um UV coating is the most popular among today’s single mode and multimode bare fibers. The following illustration shows this common design. The polymer coating is a soft, UV cured, urethane acrylate. It has a higher refractive index than the cladding layer, so it can strip out unwanted light. This polymer coating may consist of one or two layers. If there are two layers, the inner layer is called primary coating and the outer layer is called secondary coating. The primary coating has a diameter of 180um. It is made of very soft acrylate to reduce fiber’s microbend loss. The secondary coating usually has a diameter of 250um and is made of much harder acrylate to provide good abrasion resistance.

Fat Box

PTB-16-24 B fiber access termination box can hold up to 16- 24 subscribers. It is used as a termination point for the feeder cable to connect with the drop cable in the FTTx network system. It integrates fiber splicing, splitting distribution, storage, and cable connection in one solid protection box.

Aares 5A Telecom Optic Adapter, 220V

Usage/Application Telecom
Material Stainless Steel, Mild Steel , plastic
Type Threaded
Current 5A
Voltage 220V
Brand Riddhi Infratel
Usage Electronic devices

Splitter

Splitters are single mode splitters with an even split ratio from one input fiber to multiple output. this  Splitter is a 1x8,with 1 input and 8 output fiber with 1 input and 8 output fiber with an even split ratio arcoss all fibers regardless of input wavelenght.

Rackmount Din Rail Cabinet

SPECIFICATIONS:

  • Operating temperature: -40°C – 80°C Storage/transport temperature: -40°C – 80°C
  • Dimensions: For 4U: (H x D x W) 6.75” x 6.75” x 19” ,              For 5U: (H x D x W) 8.65” x 6.75” x 19”
  • Mounting: 19”  Rack mount via four mounting holes
  • Capacity: Upto 22 kgs
  • Protection class: IP20
  • Din Rail Depth: 7.5mm
  • Body:16-gauge MS with powder coating
  • Din Rail: Steel
  • Optional Cable Management: Thermoplastic

Splicing Machine

Brand Riddhi Infratel
Usage/Application Splicing Fiber
Model Name/Number OTT-A1
Type Fully-Automatic
I Deal In New Only
LCD Screen Yes
Night Work Lighting Double LED Whitelight
Optional Fixtures 0.9, 250, 3.0
Calibration Automatic
Power Supply 13.5 V
Splicing Picture No
Operation Method Smiple To Use, one Touch Operation, Automatic Welding With Cover