Showing 1–12 of 58 results

Show sidebar
Show 9 12 18 24

12 Port Micro Din Rail Patch Panel/LIU

SPECIFICATIONS:

  • Material : CRCA/Aluminum with seven Tank Process powder coating.
  • Dimensions : 150*105*120 mm (H*W*D)
  • Color : RAL 7035/Black
  • Cable grommet : FR grade Nylon
  • Splice Holder : FR grade Nylon
  • Splice Holder Dimension : 90*55*15 mm (L*W*H)
  • Cable Glands : Nylon with nitrile butadiene rubber, cable diameter of 5mm to 14mm max available
  • Fiber components standard : Telecordia GR 326
  • Insertion Loss : less <.3dB (Multimode), < .2dB (Singlemode)
  • Plug/Unplug durability : 1000 times

6 Port Nano Din rail Patch panel

SPECIFICATIONS:

  • Material : Mild Steel/Aluminum with seven Tank Process powder coating.
  • Dimensions : 130*65*105 mm (H*W*D)
  • Color : RAL 7035/Black
  • Cable grommet : FR grade Nylon
  • Splice Holder : FR grade Nylon
  • Splice Holder Dimension : 50*48*8 mm (L*W*H)
  • Cable Glands : Nylon with nitrile butadiene rubber, cable diameter of 5mm to 14mm max available
  • Fiber components standard : Telecordia GR 326
  • Insertion Loss : less <.3dB (Multimode), < .2dB (Singlemode)
  • Plug/Unplug durability : 1000 times

6/12/24 Port Mini Din Rail Patch Panel/LIU

SPECIFICATIONS:

  • Material : Mild Steel/Aluminum with 7 Tank Process powder coating.
  • Dimensions : 210*44*150 mm (H*W*D)
  • Color : RAL 7035/Black
  • Cable grommet : FR grade nylon
  • Splice Holder : FR grade ABS
  • Splice Holder Dimension : 90*55*15 mm (L*W*H)
  • Cable Glands : Nylon with nitrile butadiene rubber, cable diameter of 5mm to 14mm max available
  • Fiber components standard : Telecordia GR 326
  • Insertion Loss : less <.3dB (Multimode), < .2dB (Singlemode)
  • Plug/Unplug durability : 1000 times

Aares 5A Telecom Optic Adapter, 220V

Usage/Application Telecom
Material Stainless Steel, Mild Steel , plastic
Type Threaded
Current 5A
Voltage 220V
Brand Riddhi Infratel
Usage Electronic devices

Adjustable Cable Storage Bracket

Applications Adjustable Cable Storage Bracket Assembly is used to store the excess ADSS & OPGW cable which is being maintained in the middle of the line on the poles or cross arms & to use at the time of joints. SS Strip: SS Strap with casing is supplied in 50m roll with indication of remaining length. SS Strap with Buckle shall be used for mounting the bracket on the pole as per load requirement. Minimum two loops of 0.75 meter each with one Buckle shall be considered for attaching the brackets to the poles.

Adjustable Cable Storage Bracket

Installation Instruction 1. The Adjustable Cable Storage Bracket Assembly is mounted on the pole at height of m with the use of SS Strip & Buckle. 1.4 Down Lead Clamp Assembly (Wedge Type) Product Overview Down Lead Clamp shall be used to properly fix the Aerial ADSS cable on the pole or cross arms to avoid the Movement of the cable under wind condition. The Down Lead Clamp Shall have the provision to fix it on the pole or cross arms by Stainless Steel

Anchoring / Tensioning Clamp assembly (Edge Type)

Applications Anchoring assemblies shall be used to firmly hold ADSS cable to a concrete, wood or steel pole and transmit the mechanical tension at the end of a run, tensioning points and a major change in direction of over 20 degrees.  

Cable Storage Bracket Assembly (Helix Type-II)

Product Overview Cable Storage Bracket Assembly shall be used for storing Optical Fiber Cable for future repair & maintenance which has to be carried out at regular intervals & to be installed at terminating points if required. This Bracket is made up of Hot Dip Galvanized steel will serve the purpose on both the pole to pole & pole to wall spans.

Dead End & Termination Fittings (Helix Type-I)

Product Overview Dead End & Termination Fittings are designed for dead-ending aerial ADSS cables on access networks & are installed on the Tension or Terminating poles where splices are located or at the poles where the overhead alignment takes a turn of angle exceeding more than 15°. Span length between Tension poles does not exceed more than 75m. These fittings relieve the optical fiber cable of its compressive, bending & clamping stresses.

Dead End & Termination Fittings (Helix Type-II)

Product Overview Dead End & Termination Fittings are designed for dead-ending aerial ADSS cables on access networks & are installed on the Tension or Terminating poles where splices are located or at the poles where the overhead alignment takes a turn of angle exceeding more than 15°. Span length between Tension poles does not exceed more than 90 meter. These fittings relieve the optical fiber cable of its compressive, bending & clamping stresses.

Demountable Pulleys (Helix Type-I)

Product Overview Demountable Pulleys are used during the installation of Aerial Optical Fiber Cables. These are made from Mild Steel & the contour of the wheel is coated with rubber or any other suitable material for free movement of the Aerial Optical Fiber Cable.

Down Lead Clamp (Edge Type)

Applications Down Lead Clamp is used to properly fix the aerial ADSS cable on the pole or cross arms to avoid the movement of the cable under wind condition. The Down Lead Clamp has the provision to fix it on the pole or cross arms by Stainless Steel Straps & Buckles.